Description

Programming Siemens Simatic S7-300/400 PLC & KTP 400 HMI device

Video training tutorial course

————-

Language: English

Duration:   5:30 hours

Number of video clips: 23

What you’ll learn

————-

 

Hello friends, my name is Seyedreza Fattahzadeh. I am admin of plcgoods site with over 20 years of experience to program different brands of PLCs and a passionate creator of PLC programming educational courses.

In this course of programming Siemens Simatic S7-300 PLC, I have developed a complete course to teach you how you can be a great PLC programmer as long as you are eager to learn and follow steps I show you during this course.

Based on a quote from Confucius, most of us learn a subject by doing it. So I always follow 4 steps in generating any course.

Step 1 I specify the brand and model of the PLC I will use at the beginning of the course.  I introduce the PLC hardware which in this case is a Siemens Simatic S7-300 PLC installed on my PLC trainer.

Step 2: I specify the suitable software that I will be use to edit, simulate or execute those developed programs. I show you how to lunch Simatic Manager software, how to define a project, configure the hardware, and start editing your first program using basic instructions.

Step 3: I explained the most used instructions with many practical examples; how each instruction works and how to link each test code to the Factory IO software.

Step 4: I will teach you how to link and simulate each developed test code to an HMI device or the Factory IO. And finally, how to Implement a 4 floor Elevator control system using Simatic Manager software and a typical HMI display device. I also covered some more advance topics such as different classes of on/off , Proportional , PI and PID controllers.

There are only these 4 simple steps you need to follow to become a confident PLC programmer.

I am confident that I can help you to become a pro PLC programmer as well.  After taking this course you will see that it is not as complicated or as difficult as you might think.

As you know, PLC programmers spend most of their time working with software so you have to know how to navigate your way around the software you’re going to be using and you need to get access to the software in the first place so you can learn and practice it. Which you probably know buying software can be very expensive. However, through this course, I show you how to start learning programming Siemens S7-300 PLC in conjunction with the state of art Factory IO or an HMI display device without spending a dime.

So, if you want to finally get confident with PLC automation or you don’t have to miss out on future job opportunities that require PLC skills or you just want to make yourself a better asset at your current job or to get promotions and enjoy more fun and rewarding career, then here is what we want you to join taking this course now, you will be glad you did.

To become a PLC programmer pro, you just need to do 2 things:

1-To join this training video PLC on line course.

2- To have the motivation and passion to learn.

The longer you put off learning PLC programming skills, the longer you’re going to stay stuck in the same place. You owe it to yourself to get access to our PLC training course. So go ahead and get this course, you’ll be glad you did.